https://youtu.be/JbHpTKiLfA4
OK - so you don't need to buy ALL the resistors... just the 3w or 5w ones with values .5 - 5.6 Ohm
https://youtu.be/JbHpTKiLfA4
OK - so you don't need to buy ALL the resistors... just the 3w or 5w ones with values .5 - 5.6 Ohm
Good stuff !
Great video, very informative!
Using Madcow's method and a lime/red orange/royal blue rebel to achieve a golden yellow blade!
IMG_20150920_020429.jpg
With this setup I get a lavender foc!
I hope my wife likes it...
Thanks for another awesome video! (I kind of wish these were out when was first researching how to build my own saber).
This is just what I did last week to play with getting a purple out of an old R/G/rB tri rebel I had wired up (but never used).
image.jpgimage.jpg
Sometimes simple just works. For just a few $, and some patience, you can experiment and play around with color mixing.
I'm NOT a fan of alligator clips for this though. I found some "mini" springs at an electronics website, that you can pry open and slot your wire/resistor into. It eliminates the need for solder, and provides a more secure connection.
image.jpg
Bookmarks