Page 5 of 10 FirstFirst ... 3 4 5 6 7 ... LastLast
Results 41 to 50 of 92

Thread: Kylo Ren Force FX Lightsaber Conversion Tutorial

  1. #41
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default

    Did not get much response form the couple we sent out. Just sent out another so once I hear back on that one we will move forward. I think they are good to go though.
    Tim
    The Custom Saber Shop

  2. #42

    Default

    Quote Originally Posted by Strydur View Post
    Did not get much response form the couple we sent out. Just sent out another so once I hear back on that one we will move forward. I think they are good to go though.
    cool, good to hear!

  3. #43

    Default

    Quote Originally Posted by Strydur View Post
    Did not get much response form the couple we sent out. Just sent out another so once I hear back on that one we will move forward. I think they are good to go though.
    If you need someone who will actually give you feedback, let me know! I'll buy it, install and give you feedback as soon as I get it!

  4. #44

    Default

    Anyone the size and length of those headless screws on both sides of the hilt? In the 19th picture.

  5. #45

    Default

    I'm just sitting here pissed off that the conversion kit was finally released...and it sold out day one before I was able to buy one for myself...

    >_<

    fml

  6. #46
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default

    We did a small batch to begin with as we did not get much response on the Prototypes we sent out. What we did get was positive but not enough that I was going to risk sending out 100+ bad ones. We will make more as soon as we get positive feedback or at least no negative feedback.
    Tim
    The Custom Saber Shop

  7. #47

    Default

    Quote Originally Posted by Strydur View Post
    We did a small batch to begin with as we did not get much response on the Prototypes we sent out. What we did get was positive but not enough that I was going to risk sending out 100+ bad ones. We will make more as soon as we get positive feedback or at least no negative feedback.
    If you'd like, and as I offered before, I'll do a full write-up/review of the part if you send me one.
    Been itching to convert my FX Kylo saber...

  8. #48

    Default

    Quote Originally Posted by DarthMario95 View Post
    I'm just sitting here pissed off that the conversion kit was finally released...and it sold out day one before I was able to buy one for myself...

    >_<

    fml
    There are a couple left in stock.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  9. #49

    Default

    What can I use to bridge the 5 pads together?
    And do you reuse the cross guard blades? If so do you have to cut them down or sand them?

  10. #50
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default

    solder..wire..etc..

    You do nothing to the side blades as this kit only addresses the main blade.
    Tim
    The Custom Saber Shop

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •