I know I keep changing the design but here are pics of the latest and greatest! Best part though is I'm actually starting to cut parts for this one so I'm feeling pretty good. I'm going with a primarily PVC chassis to hold the NBv4 soundboard, 18650 Battery and battery holder, and 2W bass speaker. The plan is to step the PVC down to secure the LED module at the end of the chassis and then slide an aluminum blade holder over the LED module for better heat rejection. Then everything will be covered up by a simple, yet elegant, shroud. The momentary tactile switch will sit inside a custom activation switch cover that will be secured underneath the shroud. Wires will then feed from underneath the shroud, into the chassis and back to the soundboard.
Any thoughts about covertec versus Kobold D-ring? I'm leaning D-ring but thought I'd ask just to see.
MTFBY!
Cutaway Layout.jpgFront View.JPG3D View - Chassis (2).JPG3D View - Chassis (3).JPG3D View - Chassis (1).JPG3D View.JPG
Bookmarks