Results 1 to 2 of 2

Thread: Help disassembling old hasbro vader force fx.

  1. #1

    Default Help disassembling old hasbro vader force fx.

    Hello, I was taking a look at one of the conversion tutorials for the vader lightsaber and following it to disassemble my own. I just want the blade out and im gonna display the hilt, not interested in the conversion. This is the one I was following http://forums.thecustomsabershop.com...kits-available.


    I got down to the part where you pry all the wire plastic things off, and then it says I can remove the blade. I tried to, it moved a couple inches, and now no matter how hard I slam this thing it will not move. I swear I did not miss a step, the only thing I may have done wrong is not push the yellow wires far enough into the hole earlier in the tutorial, is there anything I can do to get this blade out?

    Thanks in advance! PS, I've taken every screw, bolt, and pin off this thing in a desperate attempt to find out what's wrong, here is what it looks like right now. http://imgur.com/nhWTRkL

  2. #2

    Default

    What do you mean slamming? The blade and guts should be pulled out the top of the saber.


    I asked my wife if i could get a $5,000 lathe and she said "...no, but thanks for asking." : D

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •