Second Saber "Vindicare" sitll in design stage

[Grimlock84]

I like the idea of using aluminum pots for "scrap" aluminum! I may have to check my cabinets to see what "materials" I have for my next build.

[Thalan the Exiled]

I am going to have Tim flatten out the space above and below each hole .25" wide so they sit flat on the hilt. And I am going to have holes drilled and tapped for some 4-40 screws. I will drill holes in the claws to allow the screws to be recessed in and the screws will be short enough that they don't protrude in and interfear with the blade. Another reason why I want the exact measurments for the spaces above and below the vents on that blade holder. Also why I am going to do a test build using wood to make the claws. Either way the flat part and the mount holes will be done by Tim. I guess if I have him center the holes I can always adjust the location on the claw to match since I will be making a test piece first. But I have to wait till the parts come back in stock, the BH,pommel,and choke are all out of stock right now.