LED Latching Ring Switch Help

[neatht]

Hi, I'm new to Lightsaber building, and i was wondering which resistor i should use with the 16mm Anti Vandal Latching Green Ring Switch.

[Silver Serpent]

That would depend on the battery you're using. You'll need to calculate the resistor value with the instructions in this post: http://forums.thecustomsabershop.com...e-to-Ohm-s-Law

Or you can get the DynaOhm resistor from the store. http://www.thecustomsabershop.com/20...stor-P847.aspx