Good afternoon all, just wanted to show off my saber. I picked up everything off the custom saber shop website, watched Robs videos as well as get advice from the nice people from this forum.
Here is what i did (over a few month span):
1. I started off just with a basic saber, no paint, no sound ONLY LED light.
2. Decided to add onto the design, I added choke, as well as adjust the activation switch.
3. Added sound and last paint!
eventually I need to fix up my wire set-up (kinda messy on the inside)
Saber Specs:
-Slight weathered look with sprayed black detail
-Rebel stat LED
-nano biscotte sound moduel V2
-short momentary 16mm AV switch
-premium 1.5w speaker
-3.7V 18650 lithium battery
I present my Sith Lightsaber!
saber1.jpg
saber2.jpg
saber3.jpg
IMG_81322.jpg
IMG_8106.jpg
Bookmarks