My Saber parts list.
SaberBuilder_internal2.jpgSaberBuilder_render2.jpg

I need suggestions on how to attack this. 1. Make the chassis with the speaker to hold the crystal chamber above. I'm not sure if Rob sells his PVC chassis for my top end but I may be able to grind one out. 2. As for fitting my chassis, should I do a single or 2 piece maybe mounting a vertical recharge port above the crystal chamber behind the battery. Or maybe there is someone out there who makes custom 3D printed chassis that can work for my design. A modular chassis design would work as well. Any help would be appreciated Thanks everyone

All MHS exterior parts from bottom of saber to top

MHSV1 Blade Holder Style 20 V2 (length 3.5" used as pommel)

2" Double female threaded connector

Double male with slots (1.5" Unthreaded length with 6 slots and 1.15" ID)

5" Double female threaded connector

MHSV1 Blade Holder Style 4 (2.5" long with 2" unthreaded)

14" OAL 2 part chassis

1. Speaker with Crystal Chamber at bottom
MHS speaker mount V4
2 purple leds using JST connectors for both

2. Rob style PVC chassis at top or
Acrylic Chassis Disc for PC 2.0 and 18500/18650 pack - S2