Sink tube saber check list.

[Red-Eye]

Making my first saber. I wanna start with a full sink tube saber. Just looking to know if I have my parts right for the hilt.
Will be using a sound card from a 2005 Anakin MR.

http://www.thecustomsabershop.com/Me...yWishlist.aspx

[sgcdialler]

Unfortunately, wish lists are tied to your account, so we can't view your list here on the forums. You'll have to list out all the parts you have on there for us to help you better.

[Red-Eye]

This is what I ended up with from the shop. I hope I got the right things and get on this sale. Let me know if ibgot anything wrong or anything else I need.

1 switch10 SPST Latching Guarded switch with silver button

1 S18650P Li-Ion 18650 3.7V 2600mAh PCB Protected Rechargeable Battery Module

1 1.45LED 1.5" Sink tube LED/Blade holder

1 Bmbutton Black machined button for Covertec clip

1 TW1PLUG 1" Hilt safety plug (Trans White)

2 STTAPE Star thermal tape pad

1 Coll87 Collimator Lens 8.7 deg viewing angle

1 CREEHLDR Cree XP-E2/XP-L Lens Holder

1 GRNXPE2 Green Cree XP-E2 CopperNova

1 Pspeaker Premium 28mm Speaker

1 8-32red 8-32 x 3/8" Red Acetal thumb screw

[JakeSoft]

I noticed that no charger is included in your list. How do you plan to charge the battery? Do you already have a Li-Ion charger?

[Red-Eye]

If I don't have one around here. Those are easy to come by. Other than that everything looks okay tho? I don't need the resistor is my main question?