Wiring check for a PC 3.5, recharge port, and a G/G/W LED

[moonpopper87]

Hello all!

After a few months of research, I believe that I am ready to build my first saber! Please take a look at my wiring diagrams and let me know if they are correct!

[Silver Serpent]

You've got the LED star wired incorrectly. Each die is controlled by the +/- tabs adjacent to that particular die.

The rest of the wiring looks ok to me.

[moonpopper87]

You've got the LED star wired incorrectly. Each die is controlled by the +/- tabs adjacent to that particular die.

The rest of the wiring looks ok to me.

Ohh, ok. Thanks so much!

[Bark]

The DynaOhm also has specific posts in addition to putting it on the Positive(+) side of the switch LED. The "IN" post needs to attach to the power source and the "OUT" post needs to attach to the switch LED+ terminal.

[moonpopper87]

The DynaOhm also has specific posts in addition to putting it on the Positive(+) side of the switch LED. The "IN" post needs to attach to the power source and the "OUT" post needs to attach to the switch LED+ terminal.

Thanks!