-
Force Aware
-
Jedi Initiate
If that is a dyna ohm going go the switch it needs to be on the positive I believe but other than that it looks good. That is exactly how I have my saber set up except I used resistors
Last edited by Thalan the Exiled; 04-15-2015 at 06:06 PM.
-
Force Aware
Yeah that's the dyna ohm. You have your saber set up with the 4 AAAs and the Tri-Cree with resistors? If so, how is the life/brightness with that setup? I know the buckpuck is supposed to give you even brightness throughout the battery life but is it that much of a noticeable difference in brightness towards the end of the battery life?
And ok, so this is right?
-
Jedi Initiate
Life is ok. I switched to 7.4v pack just to get better life. Tbe brightness was very consistant. And yes that looks right.
-
Force Aware
Gotcha. Well thanks so much. I really appreciate your help!
-
Force Aware
Actually you need to move the Dyna-Ohm, placed between the battery and the switch won't last very much.
This way I think it will be fried by the current drawn from the blade LED.
Just move it on the wire between NO1 and LED+ pads and you are just fine.
-
Jedi Initiate
Yes I'm sorry he is right. . Wasnt thinking..getting old here. Lol
-
Force Aware
Thank you guys so much.
And no worries, Thalan, your input is still very appreciated!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks