First of all... Greetings all!

I am completely new to the saber building scene and so... I am a bit wet behind the ears to say....

I am machining my first hilt now and I am getting the hang of that... but the internals are what
are freaking me out right now....

I have the following items that were donated to me or purchased:

1. Tri-Rebel LED (RGB)
2. Obsidian 3 Sound Card
3. 4 AAA holder with speaker mount
4. Speaker
5. Short AV style momentary button (yellow)
6. Dynaohm resistors

What I need help with is the rest.... I am not sure what else I need or really how to get started on wiring things up.
What I would like to achieve is this: Use the Red/Green dice to create a YELLOW blade... and then add the Blue for FOC
to get Bright White.... At least that is what I think combining all three will give. I tried to find a color mixing chart for the
TRI-Rebel without much success.

I saw though that someone was using the RGB with a 1ohm 2W resistor on the RED, and a 3ohm 1W on the green to get an orange color
blade.... I just wonder what I would need to get a good color Yellow.

I am also unsure what would be the best battery setup for this. I am NOT intending this to be a stunt/dueling saber.... Just ones for pics
and stuff.....

Help a newb out.... point me in the right direction... If you have pics and diagrams all the better!

Thanks in advance!

Cujo
TS-31311