Hey guys, this is my first post to the forums, I have a question and that question is. Is it possible to make a saberforge soundboard, more specifically, the sabercore crimson to work with LED's from makoto?
Thanks in advance
-Jegan
Hey guys, this is my first post to the forums, I have a question and that question is. Is it possible to make a saberforge soundboard, more specifically, the sabercore crimson to work with LED's from makoto?
Thanks in advance
-Jegan
This forum is better suited to answer questions regarding products sold in this store, so you want to direct your question to Saberforge. That being said, I would assume not, as only makoto's sound cards MR/Hasbro and the CFLS can support string blades, as they have special wiring pads on their cards to support multiple LEDs within a certain amp and voltage range.
On the other hand, some builders such as Hampton's have set up string blades off of the nano biscotti, but these lack the scrolling effect that is so popular on string blades, so I don't really know.
Your best bet is to ask the vendor themselves.
Last edited by Ty_Bomber; 02-15-2015 at 12:57 PM. Reason: discussing sf
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Bookmarks