Hello, I am new to the forum and saber building. I own 2 prefab sabers from company x (bought before I found TCSS, ooops ). My 3rd is going to be a DIY saber.

I call it the Saboteur Shoto. It is meant to be small, somewhat unassuming, and often overlooked - easily mistaken for a comm-link or food capsule. It can be easily used in a concealed carry manner on my character much like a hold-out blaster. The overall length is just under 8" with a 16" blade. The saber will be costumed with a nylon sheath, so no Covertech or D-ring is needed. I have watched all of the youtube videos on assembly, etc so I am mostly confident that I haven't forgotten anything, but any input would be appreciated.

Due to it's size, I decided to go very basic.

Here is the proposed saber (Trim rings will go on both ends of the 5" fluted piece).
Saboteur Shoto MHS External View.jpg

The internal view.
Saboteur Shoto MHS Internal View.jpg

Here is my parts list, some spares were ordered.
Items
1 of: MHSV1 Blade Holder Style 19
1 of: Drill & Tap Hole (8-32)
1 of: 8-32 x 1/8" Set screw
1 of: 8-32 x 1/4" Set screw
1 of: .75" Male / Female extension
1 of: 5" Fluted double female threaded connector
1 of: Pommel style 1
4 of: Media blasting
2 of: Trim Ring 1
1 of: 9" Electronics shield for 1.25" ID tubes
2 of: 24 gauge wire (sold by the foot) (Black)
2 of: 24 gauge wire (sold by the foot) (Blue)
2 of: 24 gauge wire (sold by the foot) (Red)
2 of: 24 gauge wire (sold by the foot) (White)
2 of: 1/8" Heatshrink tubing
2 of: Super Lube Synthetic Grease
1 of: Rebel Star LED & MHSV1 Heatsink Module BLUE
1 of: 4AAA Battery Holder with JST connector
2 of: 2.7ohm 10w resistor
1 of: SPST Latching Guarded switch with blue button

Additional: I have a 16" blade ready to go. Also acquired all of the basic soldering equipment, electrical tape, neoprene washers, foam, tools, etc.

I double checked my resistor selection.
Saboteur Shoto Blue LED 4AAA Resistor Diagram.png

Lastly, here is my internal layout.
Saboteur Shoto Internal Wiring Orientation.jpg

So is everything okay to go?

Thanks in advance for the help.