My first Saber

[TenFootNine]

Hey guys,
here are the parts I just ordered for my first saber.
I hope I got everything right (I'm pretty sure I did), but I wouldn't mind if someone could check.
The idea is to pretty much go along with the youtube-video (saber with sound),
but to save as much soldering as possible.
The Nano Biscotte is pre-wired, and the extra wiring harness is to make the part of the electronics detachable.
Anyway, without further ado, here are the parts:

1 of: LED "Corbin style" Battle blade 1" OD (32 inches)
1 of: Trim Ring 1
1 of: MHS choke style 3
1 of: 12 Colored Discs
8 of: 1-3/16" ID Black O-ring
1 of: Super Lube Synthetic Grease
2 of: 1ohm 5w resistor
1 of: MHS speaker mount V6 - For 28mm Speakers
1 of: Premium 28mm Speaker
1 of: NB V2 MWS Header and Wiring Harness
1 of: 18650 Single Cell Holder
3 of: 26 gauge wire (sold by the foot) (Black)
3 of: 26 gauge wire (sold by the foot) (Green)
3 of: 26 gauge wire (sold by the foot) (Red)
2 of: 1/16" Heatshrink tubing
1 of: 3/16" Heatshrink tubing
1 of: Hilt style 4
1 of: Rebel Star LED & MHSV1 Heatsink Module
1 of: MWS Pre-Wired Nano Biscotte Sound Module V2
1 of: MWS Short Momentary 16mm AV Switch - Nickel
1 of: JST Extension Red/Black 24 AWG
2 of: 8-32 x 1/8" Set screw
1 of: Drill & Tap Hole (8-32)
1 of: Drill & Tap Hole (8-32)
1 of: Black machined button for Covertec clip
3 of: 8-32 x 1/4" socket head
1 of: MPS Clip
1 of: MPS Insert style 7
1 of: MPS Pommel style 5
1 of: MHSV1 Blade Holder Style 24

I have been playing with the idea of a custom saber for about 5 years now, and finally decided to order one.

One further question:
Does anyone have experience with shipping times to germany? Including the drilling and inclusing a delay with customs?

Thanks so much in advance!

[Lobezno]

Hi! I've just purchased some stuff from here a couple of weeks ago. The difference is that I didn't get the biscotte, this sabers are for tough filming battle... And the powder coating, I see urs is all silver metal.

Can't help you with the timing, 3 or 4 weeks, I guess? ... I'm from Spain, I'll post some pictures when I receive the package, but mine will be probably more delayed.

Put a picture from the builder with the holes location, etc, it will help more to check all parts.

Question: why rebel star and not Cree?