Page 1 of 2 1 2 LastLast
Results 1 to 10 of 56

Thread: Chassis Designs and ideas

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Chassis Designs and ideas

    Many people have been asking me to do a Crystal Chassis tutorial vid. And I will at some point. The problem is that there are just SO MANY WAYS to make a cool chassis using the parts available here at TCSS!

    This thread is for you to show pics and videos of how YOU did it. After a while the community will be able to come to this thread to see some great examples of what is possible.

    Please post pics and videos of chassis mostly built with parts from TCSS, don't confuse new customers by posting about parts you got elsewhere, or had made.
    Last edited by Strydur; 01-26-2015 at 07:11 PM.

  2. #2

    Default

    Chassis in general or specifically crystal chassis?

  3. #3

    Default

    Quote Originally Posted by cvsickle View Post
    Chassis in general or specifically crystal chassis?
    Chassis in general, as long as it is using TCSS parts.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  4. #4

    Default

    Here's one I did for for a NB and an 18650 with a recharge port. It's about 98% TCSS parts; I chose to use (2) outsourced 4-40 nuts and the accent leds for full disclosure. Everything else is Shop - Tim even modified the one recharge port disk to add mounting holes for the smaller disks that hold the NB/battery. I modified the speaker holder to mount the recharge port disk.


  5. #5

    Default

    I'm not sure what other people think but I find the chassis parts in the store to be confusing. I think of it as kind of advanced stuff and "I'll try it on a build some day."

    Say you want to power a Nano Biscotte sound card with a 18650 rechargeable battery.
    - first you purchase Acrylic-Chassis-Disc-for-NB-and-1850018650-pack.
    - then you need threaded rod and some aluminum spacer, what length spacer? the chassis description doesn't say and neither does the NB info.
    Is it
    1/2-Aluminum-316-OD-spacer
    or
    3/4-Aluminum-316-OD-spacer
    or
    1-Aluminum-316-OD-spacer

    Then what about aluminum discs. Is it chassis disc style 2,3,4 or 5 ? and how does the Acrylic-Chassis-Disc-2-hole-to-3-hole-adapter work and is it needed?

    I think that some updating of the chassis section of the store, along with a basic chassis parts video, would boost people's confidence in using a chassis in their builds.

  6. #6

    Default

    Great start amwolf!


    Quote Originally Posted by Sevinzol View Post
    I'm not sure what other people think but I find the chassis parts in the store to be confusing. I think of it as kind of advanced stuff and "I'll try it on a build some day."

    Say you want to power a Nano Biscotte sound card with a 18650 rechargeable battery.
    - first you purchase Acrylic-Chassis-Disc-for-NB-and-1850018650-pack.
    - then you need threaded rod and some aluminum spacer, what length spacer? the chassis description doesn't say and neither does the NB info.
    Is it
    1/2-Aluminum-316-OD-spacer
    or
    3/4-Aluminum-316-OD-spacer
    or
    1-Aluminum-316-OD-spacer

    Then what about aluminum discs. Is it chassis disc style 2,3,4 or 5 ? and how does the Acrylic-Chassis-Disc-2-hole-to-3-hole-adapter work and is it needed?

    I think that some updating of the chassis section of the store, along with a basic chassis parts video, would boost people's confidence in using a chassis in their builds.
    Valid input - thank you. I hope that things will be clearer with the examples to be posted in this thread, and upcoming videos.

  7. #7

    Default

    Here are a few pics of my first "in use" chassis, in my son's lighhtsaber (Sunfire).

    IMG_0248.jpg IMG_0250.jpg

    I used a "Speaker Mount V5", with new (done by me) 4-40 thread holes drilled & tapped to align with the "Acrylic Chassis Discs for NB/18500 1.15 ID parts" (since those holes do not match with standard ID parts like the speaker mounts).

    The large space between the card and the speaker mount is for SD Card access. In retrospect (and for the next build) I should have "flipped" the card around, placing the SD card facing the front of the saber, and moved the card as close to the speaker mount as possible. I didn't do that in this build, as I wanted to keep the wires off the card as clean as possible (being my first build). I'm not entirely happy with the swing response (even after adjusting the sensitivity), as where the card sits now, it pretty much right under the palm of my son's hand when he is holding the saber.

    Next time, smaller gauge wire (to help with the cram-fu), and better placement!

  8. #8

    Default

    Since learning of this thread & deciding to build a chassis for my saber, I have been waiting to post something here & that time has come!

    I still have yet to put the electronics (speaker, recharge port, panasonic 18650 & Nano Biscotte) in it, but the design of the chassis is complete. This will be going inside a MHS based Starkiller replica. The main Crystal Chamber has a focusing & power crystal in it & the secondary chamber (which will be hidden under the grip) holds an Ultima Pearl for now, I may change this up later so this chamber will remain unlit


    For those interested, here is my Parts list (all TCSS):
    4-40 threaded rods & nuts
    Aluminum 3/16" OD tube for the spacers
    4 Petite Crouton discs (used for the Crystal Chambers - 2 each)
    2 Nano Biscotte/18650 discs
    Recharge Port disc assembly
    Speaker Holder v4

    The Crystals & Sphere came from a local/online shop

    Really happy with how this turned out, but would love to hear your input!
    Last edited by NaasadTal; 07-19-2016 at 08:36 PM.


    Naasad Tal - A.K.A. Chris S.
    My Saber Build - http://forums.thecustomsabershop.com...from-MHS-parts

  9. #9

    Default

    My latest MHS Chassis, it locks into the blade holder via a gender changer and a 1.2" double female below blade holder. I had to modify that area internally to get my switches and chassis disk 5 to lock in while still allowing room for my switch wires/LED wires to route through the CC:

    This one has a red, green, and blue 5mm LEDs mounted in the lowest RC Port Chassis Ring, near speaker holder 4. They get great shine through on the clear chassis disks! It looks great.

    Last edited by Tom Tilmon; 11-22-2017 at 04:14 PM.

    "Mistakes are our greatest teacher."

  10. #10

    Default

    Nihilus, saber above was inspiration for this chassis:

    "Mistakes are our greatest teacher."

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •