PC 3.5 help

[Forgetful Jedi Knight]

Still not working. I originally had my setup with a pc 2.0 and everything was working fine.

Hmmmm that's strange. Did you check the override file and make sure things are changed in there?

[jedi131]

What would have to be changed in the overide file?

[Forgetful Jedi Knight]

What would have to be changed in the overide file?

The main LED setting, if there is one there.

[jedi131]

these are the files in override:
## Override File
vol=4
beep=40
valsnd=1
switch=2
offp=0
offd=200
lc=400
hs=200
ls=70
i=55
swing=200
clash=150
lockup=150
## Color profiles

color0=0,740,0

fcolor0=740,230,0
color1=0,0,740

fcolor1=700,0,740

color2=740,0,0

fcolor2=0,430,200
color3=0,630,200

fcolor3=500,740,0

color4=640,0,430

fcolor4=0,0,740

color5=740,230,0

fcolor5=0,740,0

color6=540,730,0

fcolor6=0,740,400

[jedi131]

this is the main config file:
// PCv3 config
led=700,0,0
fled=700,0,0
focmix=010
resume=0
shmrd=72
shmrp=6
shmrr=12
shmr%=0,50
focd=200
focp=10
focr=10
foc%=0,50
qon=0
qoff=0
fade=0
flks=2
flkd=12
idlepulsing=1
idleled=0

[Madcow]

Delete everything below the line "## Color profiles" in the override file. For a single colour saber you do not want colour profiles that replace the settings in each sound bank.

[jedi131]

Delete everything below the line "## Color profiles" in the override file. For a single colour saber you do not want colour profiles that replace the settings in each sound bank.

deleted, no change.

[Forgetful Jedi Knight]

deleted, no change.

The LED setting should be 1400,0,0.

[jedi131]

The LED setting should be 1400,0,0.

Tried that before, didnt work. Tried it again, didnt work