Hi all, happy new year. (sorry for double post)
Have built my first LED saber as a (late) xmas gift for my son. (did EL a number of years ago), and have encountered a problem I can't solve via forum searching. I have my new PC3.5 wired as seen in the pic. I do not have an aux switch (really didn't plan for it nor want but NB was sold out). I have a tri-rebel RB-RB-W wired up, but I don't have the W hooked to FoC yet, as I'm waiting for the big 4.7ohm resistor in the mail. That being said, I have connected everything for a test. The board powers up, turns on but does not illuminate the RB-RB (series) EXCEPT when I activate FoC, then the blue LEDS do flash momentarily. This one baffles me. I'm thinking it is something in the config files that I don't get (frankly much of that manual is losing me) or perhaps a function of the White LED not being hooked up yet? But don't know why the blue is flashing on FoC. I have not adjusted any settings on the files yet (as I dont' completely understand them all). Could use a little insight.
PC3 image.jpg
Bookmarks