Results 1 to 5 of 5

Thread: ANH Blue from C/C/RB

  1. #1

    Default ANH Blue from C/C/RB

    Cyan/cyan/royal blue Luxeon tri-rebel on a 20mm star.
    Royal blue and 1x cyan driven by the 4.5V Anakin ROTS board (2005) and the third cyan driven by a 700mA constant current circuit in parallel with the sound board, both wired to a DPST slide switch. image.jpg

  2. #2

    Default

    Pretty...

  3. #3

    Default

    Nice of you to say so. Thanks!

  4. #4

    Default

    Did you put any resistors on this to get the color you wanted other than resisting the initial + out of the luexon

  5. #5

    Default

    No, the MR board puts out about 900mA of constant current, and I used a constant current driver (think low voltage buck puck) on the third LED in place of a resistor.
    So certain are you; always with you it cannot be done.
    Hear you nothing that I say?


    http://www.plecterlabs.com/Media/Doc...deTutorial.pdf
    http://forums.thecustomsabershop.com...Hardware-Saber
    ---------------------

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •