If I am seeing this correctly, you are using the .75" extension connected to the pommel. If so, won't you will be drilling through the threads of the extension in order to fit the covertec knob?Originally Posted by bigkevin61
If I am seeing this correctly, you are using the .75" extension connected to the pommel. If so, won't you will be drilling through the threads of the extension in order to fit the covertec knob?
Not necessarily.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
It looks to be enough "clear" space between the threads. If Tim tells me it can't be done, then we'll forgo the covertec wheel.
The reason on for the extension, it to house the speaker mount before the ribbed extension. (Looking to avoid too many parts modifications!)
There is 1/4" that you can use to put a covert on, but you need to carefully measure and drill/tap.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
Which is why I'm paying Tim to do it!
.75" - .63" threads = .12" = not enough for full threads on a 8-32.
Tim
The Custom Saber Shop
Does this mean you will be in touch with me about this order?
Posting Permissions
Reply With Quote
Bookmarks