First saber part list

[illuminatus]

Hey guys

So I'm building my first saber and since I don't live in the US so I wanted to run my parts list past you guys so I can get everything I need, or might need in the future, at once.

BODY
-----------------------------------------------
Pommel style 3
MHS choke style 1 short
MHSV1 Blade Holder Style 19
Box 2,3,5,6 Mounting holes service
Activation box style 2
Hilt style 2


PORTS AND SWITCHES
-----------------------------------------------
16mm Anti Vandal Short Momentary Orange Ring Switch
3.5mm R.I.C.E.? Port Style 2
2.1mm Power Jack
Black momentary switch


ELECTRONICS
-----------------------------------------------
Petit Crouton Sound Module V3
Rebel Star LED & MHS Heatsink Module (Amber)
PLI (Power Level Indicator)
7.4v Li-ion 1400mAh 18500 Battery Pack
Premium 28mm Speaker


OTHER
-----------------------------------------------
USB to 3.5mm R.I.C.E.? cable
Petit Crouton V3 Sound Module SD card
MHS speaker mount V5 - For 28mm Speakers
LED "TCSS style" Battle blade 1" OD (36 inches)
8-32 x 1/4" Set screw

So I'm getting a few things I'm not planing to use right away like the RICE and the PLI, otherwise the rest I'm planing to put together for my prototype.

My wishlist contains all this stuff and some other things http://www.thecustomsabershop.com/Vi...shlistId=33972

Thanks in advance.

[Silver Serpent]

You'll need a resistor for the LED in your AV switch. You can use the DynaOhm resistor, or calculate an appropriate resistor value for that LED. The DynaOhm costs a bit more, but doesn't require any math. If you'd like to save a buck or two, use the resistor calculator in my signature. Either way is appropriate.

You have an extra SD card for your PCv3. That's not necessarily a bad thing. Some people like to have a spare with other fonts/setup/etc. But the PCv3 does come with a SD card already.

I don't see any other issues. It looks like you've done your homework. Good luck with your build!

[illuminatus]

Thanks Silver Serpent