That would work with the spliced wires? I can't imagine slipping the heatshrink over a JST... would I just buy the adhesive heatshrink and cut it then shrink it? Keep in mind I'm working with a y-splice...
lol thanks
That would work with the spliced wires? I can't imagine slipping the heatshrink over a JST... would I just buy the adhesive heatshrink and cut it then shrink it? Keep in mind I'm working with a y-splice...
lol thanks
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elegance doesn't compromise functionality.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I know what you're working with you put the heat shrink on first (or after you cut the wires), splice and re-solder and then adjust the heat shrink in the right place and apply heat to shrink it.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
oh! I see what you mean now!
Lel thanks X3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elegance doesn't compromise functionality.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Hi! Would this: http://www.thecustomsabershop.com/16...itch-P717.aspx
fit inside the SECOND SWITCH option of this: http://www.thecustomsabershop.com/Hi...ctor-P406.aspx
WITHOUT an activation box?
Thanks.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elegance doesn't compromise functionality.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SORRY! I meant THIS SWITCH: http://www.thecustomsabershop.com/12...itch-P921.aspx
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elegance doesn't compromise functionality.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The NB doesn't use 2 switches.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
sorry. My wording was bad. I was asking (simply XP) if this switch here: http://www.thecustomsabershop.com/12...itch-P921.aspx
would fit in this hilt: http://www.thecustomsabershop.com/Hi...ctor-P406.aspx
which option would I use?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elegance doesn't compromise functionality.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
ok, thank you
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elegance doesn't compromise functionality.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ok so instead of using a DynaOhm for the switch, can I just use a 39 Ohm 1/8 watt resistor? If not, what resistor would be correct?
Thanks
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elegance doesn't compromise functionality.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Bookmarks