Hi,
I planned to make Zannah's saber half a year ago and now it's finally the time to make this costume/project real.
zannahpic.jpg
My plan:
Doing the double-saber
AND
make it possible to separate them into 2 working sabers.
Quite complex for a absolute newbie...but shipping oversee is quite expensive so I want to put as much option as possible into one order.
sabers.jpg
I tried to use some tutorials in this forum to pick these items:
2x MHSV1 Blade Holder Style 6 http://www.thecustomsabershop.com/MH...le-6-P186.aspx
2x 8-32 x 1/2" thumb screw http://www.thecustomsabershop.com/8-...rew--P111.aspx
2x Hilt style 4 http://www.thecustomsabershop.com/Hi...e-4--P866.aspx [Machine Standard style switch hole]
2x MPS Pommel style 4 http://www.thecustomsabershop.com/MP...yle-4-P91.aspx
2x MPS insert style 12 http://www.thecustomsabershop.com/MP...e-12-P535.aspx
2x MPS Clip http://www.thecustomsabershop.com/MPS-Clip-P72.aspx
1x Double ended male threaded connector style 1 http://www.thecustomsabershop.com/Do...le-1-P127.aspx
2x Rebel Star LED & MHS Heatsink Module ''LRS deep red'' http://www.thecustomsabershop.com/Re...dule-P653.aspx
2x LED "TCSS style" Battle blade 1" OD '' Lenght=26 inches Option: Clear bullet shaped
2x SPST Push on/off - Mom switch with black button http://www.thecustomsabershop.com/SP...utton-P44.aspx
2x Li-Ion 18650 3.7V 2600mAh PCB Protected Rechargeable Battery Module http://www.thecustomsabershop.com/Li...dule-P672.aspx // German Shop http://www.conrad.de/ce/de/product/2...70-mm?ref=list
__________________________________________________ ______
Dual-saber:
2x MHSV1 Blade Holder Style 6
2x 8-32 x 1/2" thumb screw
2x Hilt style 4
1x Double ended male threaded connector style 1
2x Rebel Star LED & MHS Heatsink Module ''LRS deep red''
2x LED "TCSS style" Battle blade 1" OD '' Lenght=26 inches Option: Clear bullet shaped
1x SPST Push on/off - Mom switch with black button
1x Li-Ion 18650 3.7V 2600mAh PCB Protected Rechargeable Battery Module
two with single blade:
2x MHSV1 Blade Holder Style 6
2x 8-32 x 1/2" thumb screw
2x Hilt style 4
2x MPS Pommel style 4
2x MPS insert style 12
2x MPS Clip
2x Rebel Star LED & MHS Heatsink Module ''LRS deep red''
2x LED "TCSS style" Battle blade 1" OD '' Lenght=26 inches Option: Clear bullet shaped
2x SPST Push on/off - Mom switch with black button
2x Li-Ion 18650 3.7V 2600mAh PCB Protected Rechargeable Battery Module
from http://forums.thecustomsabershop.com...-MHS-saber-huh
Step 7:
Tools you MUST have to do this project include:
Soldering Iron; Heatshrink, PPE *mum is working at an electronic company*
Drill and tap set; Tap handle *I'm working at a machine engineering company*
Okay this might NOT be the best idea.. having such a big list for the first saber(s)...
Since there are definitelly tons of things I forget feel free to correct me
Greetings,
Ami
Bookmarks