Part List - Custom Saber

[EKowalski]

hello guys, First I sincerely apologize to everyone for my bad english

after much translating reading the threads, and see several videos, I'll post here the list of items they want to buy.
Please wish someone looks up, and give me tips, if I change something or add something that is missing (services, screws, Spare parts, etc ...), do not want to lose money hehe
ok let's start.

Body of the saber
MHSV1 Blade Holder Style 17 - http://www.thecustomsabershop.com/MH...e-17-P417.aspx
Hilt Style 5 (7 "Fluted double female threaded connector) - http://www.thecustomsabershop.com/Hi...ctor-P406.aspx
Double ended male threaded connector style 1 - http://www.thecustomsabershop.com/Do...le-1-P127.aspx
2 "Double female threaded connector - http://www.thecustomsabershop.com/2-...ctor-P121.aspx
MPS Pommel style 7 - http://www.thecustomsabershop.com/MP...le-7-P386.aspx
MPS Clip - Clip-http://www.thecustomsabershop.com/MPS P72.aspx
MPS Insert style 6 - http://www.thecustomsabershop.com/MP...le-6-P263.aspx
Activation box style 10 - http://www.thecustomsabershop.com/Ac...e-10-P634.aspx

to attach to the saber jedi belt
8-32 x 1/4 "socket head - http://www.thecustomsabershop.com/8-...head-P107.aspx

I do not know if I'll need one of these also but added
MHS to 1.5 "sink tube adapter - http://www.thecustomsabershop.com/MH...pter-P162.aspx

I think the size is good 12.36 inches, 31.39 cm approximately


OK electronic parts:
Luxeon Rebel Star 'blue' - http://www.thecustomsabershop.com/Lu...Star-P523.aspx
Luxeon Rebel Lens Holder - http://www.thecustomsabershop.com/Lu...lder-P536.aspx
Collimator Lens 8.7 deg viewing angle - http://www.thecustomsabershop.com/Co...ngle-P537.aspx
Star thermal tape pad - http://www.thecustomsabershop.com/St...-pad-P483.aspx
Luxeon star heatsink (do not know if it's the best) - http://www.thecustomsabershop.com/Luxeon-star-heatsink - P220.aspx
Green LED indicator (LED this will depend on the choice of battery) - http://www.thecustomsabershop.com/Gr...ator-P495.aspx
2.2ohm 5w resistor - http://www.thecustomsabershop.com/22...istor-P11.aspx
12mm Anti Vandal Momentary Blue Ring Switch (on / off saber) - http://www.thecustomsabershop.com/12...itch-P925.aspx
I do not know how to add the items below:
JST Extension Blue / White 24 AWG - http://www.thecustomsabershop.com/JS...-AWG-P950.aspx
Male JST connector 24AWG Blue / White shorts - http://www.thecustomsabershop.com/JS...hort-P954.aspx
JST Female connector 24AWG Blue / White - http://www.thecustomsabershop.com/JS...hite-P958.aspx


electronic parts of the sound (here I have a feeling I'm forgetting something):
Nano Biscotte Sound Module V2 - http://www.thecustomsabershop.com/Na...e-V2-P806.aspx
NB V2 MWS Header and Wiring Harness - http://www.thecustomsabershop.com/NB...ness-P961.aspx
Bass Speaker 2W 28mm - 28mm-http://www.thecustomsabershop.com/2W-Bass Speaker-P662.aspx


Supports (here I am in doubt as well) if I caught these:
MHS speaker mount V3 - For 28mm Speakers - http://www.thecustomsabershop.com/MH...kers-P358.aspx
4AA Battery Holder with connector JST - http://www.thecustomsabershop.com/4A...ctor-P723.aspx

or this (my doubt is about the durability of the battery):
MHS speaker mount V6 - For 28mm Speakers - http://www.thecustomsabershop.com/MH...kers-P892.aspx


battery:
4 X AA Batteries Duracel
OR
TrustFire Protected 18650 3.7V 2400mAh Lithium Battery (2-pack) - http://www.thecustomsabershop.com/Tr...pack-P517.aspx
case take trusfire will use this also
MWS Recharge Port - http://www.thecustomsabershop.com/MW...Port-P877.aspx
just a little more work, and reading hehe

OK, now let the blade, the part that really least understood and need some help, here I make a sturdy blade combat, I selected these two items only:
1 "Thick walled Polycarbonate 40" long - http://www.thecustomsabershop.com/1-...long-P150.aspx
Shouldered 1 "thick walled blade tip with reflective disc - http://www.thecustomsabershop.com/Sh...isc--P139.aspx

I read this topic:
http://forums.thecustomsabershop.com...blade-tutorial
but have not found the other items to complete the blade on the site, here you can tell me? Thank you in advance, help somebody.

screw:
Screw Nylon 4-40 (x2) - http://www.thecustomsabershop.com/4-40-Nylon-Screw - P165.aspx
4-40 Socket Head - http://www.thecustomsabershop.com/4-40-Socket-Head - P801.aspx
4-40 Button Head - http://www.thecustomsabershop.com/4-...Head-P625.aspx

other:
1/16 "Heatshrink tubing - http://www.thecustomsabershop.com/116-Heatshrink tubing-P283.aspx
Drill & Tap Hole
Box 9.10, and 17 Mounting holes service
Adapter Powder Coating
Blade Holder Powder Coating
Pommel Powder Coating
Main Body Powder Coating
* - Plus some extra connector, or something I forgot, you can indicate me -

I look forward tips and comments guys, Thanks.

[snilam]

You will need a 16mm av switch instead of the 12mm av switch if you are using a box. I just made that goof up myself and I knew that, just wasnt thinking

[Darth Kato]

This may be a dumb question as I am new to saber building and still working on my first. But, do you need 2 of the 18650 batteries to power the sabers LED and Sound board? Almost every build list I see has 2 of them so I wasnt sure.

[snilam]

No you just need a single 18650 if you are using a nano biscotte.