Goooodbye all my monieees list - did I miss something?

[SWEGirl]

As for the resistor: If you're using a 3.7v li-ion pack, plug that into the "Source Voltage" spot in the resistor calculator in my signature, and use the LED values for your particular colored LED from the store page here: http://www.thecustomsabershop.com/Lu...Star-P523.aspx

Or you can learn Ohm's Law and do the calculations yourself.

Great thanks for that I will! Do I need any extra wires?

[Forgetful Jedi Knight]

Ya it would probe. be better BUT am trying to cut down the costs :/ hmm

It's always cheaper to do it right, than to do it over, and if you do it wrong, you WILL want to do it over.

[SWEGirl]

It's always cheaper to do it right, than to do it over, and if you do it wrong, you WILL want to do it over.

Haha yea thats tru, I think ill rethink my design. Go for a plane body and get som rubber sticker and cut out somthing nice...

[ghoti115]

Great thanks for that I will! Do I need any extra wires?

Having some extra doesn't hurt.

[Silver Serpent]

In my experience, you can NEVER have too much wire in your shop. In various colors, gauges, and flavors.

[SWEGirl]

As for the resistor: If you're using a 3.7v li-ion pack, plug that into the "Source Voltage" spot in the resistor calculator in my signature, and use the LED values for your particular colored LED from the store page here: http://www.thecustomsabershop.com/Lu...Star-P523.aspx

Or you can learn Ohm's Law and do the calculations yourself.

Is this right? http://led.linear1.org/1led.wiz?VS=3.7;VF=2.4;ID=700

So I found the right Li Ion pack in JQ sabers. But what will I do about the charger? I have a EU Plug (UK and USA dont fit), can you plugg the charger in a converter? Or should I look for a charger somewhere else?

Voltage is:
Sweden is 230 V 50 HZ Europe
United Kingdom 240 V 50 HZ UK

[Silver Serpent]

Resistor is correct.

It looks like this: http://www.thecustomsabershop.com/37...plug-P890.aspx will work if you get a US-to-Sweden plug adapter. It handles 100v-240v according to the description.

[SWEGirl]

So here is my wiring: image.jpg
There was no 2.2ohm 2w resistent will 2.2ohm 5w work?

[SWEGirl]

Resistor is correct.

It looks like this: http://www.thecustomsabershop.com/37...plug-P890.aspx will work if you get a US-to-Sweden plug adapter. It handles 100v-240v according to the description.

I see sweet i think am ready to order now yay

Thanks silver

[Silver Serpent]

Yes, the 5W version will work fine. Wattage is a minimum, so you can always go higher but not lower. Higher wattage resistors take up more room in your hilt, so don't go crazy with 10W versions unless you have no choice.