Anakin rewire

[SilentBob501]

Im taking the sound board out of a busted up anakin MR and I cant use the stock battery pack. So im trying to wire up the speaker and a new battery pack but im a bit confused as to where some of these wires go. I cant find a positive speaker wire. Maybe you guys can help.





I know the red and black wires go to battery pack, and brown wire is speaker negative, but where do i connect the yellow wire?

Oh yah and what kind of battery pack should I use for it, its a 3w running off MR board.

[xwingband]

Yellow goes to positive on battery pack. Stick with 4.8V rechargeable or 4.5V alkaline.

[james3]

I thought we did this already, hold on...

[SilentBob501]

thanks x-wing, but im looking more for an answer like 2AA, 4AAA, etc. (if it translates like that, if not then if u have a picture of a battery pack i can buy, i need this to fit in an MHS.)

[xwingband]

Dude, you don't know what voltages are?

Okies... in an MHS you could do 4AA stacked rechargables if you have room or 4AAA in the 2x2 pattern. Next would be the 3AAA or AA of normal alkalines in a triangle holder.

[SilentBob501]

ok countdown told me that my 4AAA pack was too much, and I would burn out my board. Is that true? Im asking cause my Luke board which I had running on 4AAA mysteriously stopped working.

[xwingband]

4AA of normal alkalines is too much if you run the LED off of that, but not just to run.

[james3]

First of all Countdown is smokin crack

An alkaline battery c,d,aa,aaa are all 1.5 volts how many you stack increases the voltage, provided it is in series.

4aaa = 6 volts







Sorry Bob, you had asked something like this last week and I thought I finnished it up.

edit-obtw that is the ambo speaker

[SilentBob501]

OK so just to sum up 4AAA is A-OK for 3w and MR board?

[xwingband]

OK so just to sum up 4AAA is A-OK for 3w and MR board?

If their rechargeable. If their not that's 6V's and not what you should run the LED with.