old forum user returning to the saber scene parts list.

[afrojedi]

I have this current parts list and I would like to see if I have everything I need to get the full functionality of the petit crouton.

Kill plug style 5 (Gold)
Price: $6.00
MHS choke style 3 Long
MHS "new style" Heat Sink V2
MHSV1 Blade Holder Style 26

20mA DynaOhm? Variable Resistor 20mA DynaOhm? Variable Resistor x2
MWS Short Momentary 16mm AV Switch - Nickel
Green Ring
Collimator Lens 8.7 deg viewing angle
MWS Recharge Port
MWS Short Momentary 16mm AV Switch - Nickel
Yellow Ring
8-32 x 1/2" thumb screw
LED Trans White Battle blade 1" OD (40 inches)
Price: $22.49
** Clear Bullet Shaped
1/8" Adhesive lined heatshrink tubing
Luxeon Tri-Rebel Star (Red/Green/Blue)
Box 14 Mounting holes service
USB to 3.5mm R.I.C.E.? cable
3.5mm R.I.C.E.? Port Style 1
Petit Crouton Sound Module V3
Drill & Tap Hole (8-32)
location: blade retention screw on the emitter.
Activation box style 14
Hilt style 4 Hilt style 4

[Silver Serpent]

The 8.7 degree lens will not work with the Tri-Rebel star. You want this one: http://www.thecustomsabershop.com/Lu...Lens-P778.aspx

I don't see a pommel, pommel insert, or MPS clip listed. Also the thermal tape pad for holding the LED star to your heatsink.

I'll take another look at your list once I've had a cup or two of coffee.

[afrojedi]

The 8.7 degree lens will not work with the Tri-Rebel star. You want this one: http://www.thecustomsabershop.com/Lu...Lens-P778.aspx

I don't see a pommel, pommel insert, or MPS clip listed. Also the thermal tape pad for holding the LED star to your heatsink.

I'll take another look at your list once I've had a cup or two of coffee.

pommel style 3 and heatpad added.

thanks mate.

[Silver Serpent]

You'll probably want a speaker as well.

You can get chassis parts to hold the saber internals securely, or you can build your own with a trip to the local hardware store.

You will want a 7.4v li-ion pack for the PC, but remember that Tim can't send those via normal shipping. You'll have to source them locally, or email the store about shipping them via a different carrier.

[afrojedi]

Should I search for chasis or speaker mounts? Like this http://www.thecustomsabershop.com/MHS-speaker-mount-V6-For-28mm-Speakers-P892.aspx

[Silver Serpent]

The v6 mount is very nice, but it holds the Nano Biscotte board, and not the Petit Crouton.

You'll need to look here: http://www.thecustomsabershop.com/Ch...Parts-C74.aspx for the parts necessary to secure the PC.

[Forgetful Jedi Knight]

You would likely need a speaker holder to go with it. Which one would depend on your design. The one you listed is for a NB card and a single battery.

[afrojedi]

You'll probably want a speaker as well.

You can get chassis parts to hold the saber internals securely, or you can build your own with a trip to the local hardware store.

You will want a 7.4v li-ion pack for the PC, but remember that Tim can't send those via normal shipping. You'll have to source them locally, or email the store about shipping them via a different carrier.

Will this suffice to hold the battery and pc v3
http://www.thecustomsabershop.com/Ac...k-S2-P768.aspx

And this for the 28mm bass speaker mount?
http://www.thecustomsabershop.com/MH...kers-P358.aspx

[Forgetful Jedi Knight]

You'd probably be better off with the version 5 speaker mount.

[afrojedi]

You'll probably want a speaker as well.

You can get chassis parts to hold the saber internals securely, or you can build your own with a trip to the local hardware store.

You will want a 7.4v li-ion pack for the PC, but remember that Tim can't send those via normal shipping. You'll have to source them locally, or email the store about shipping them via a different carrier.

Thanks for your help, I appreciate it.