last question:
if I get 1 of these http://www.thecustomsabershop.com/St...read-P770.aspx how many would I need cause it says 12" which would make it very long, is there a service to cut these into 4 to fit the speaker mount v5?
last question:
if I get 1 of these http://www.thecustomsabershop.com/St...read-P770.aspx how many would I need cause it says 12" which would make it very long, is there a service to cut these into 4 to fit the speaker mount v5?
You could ask Tim if he would cut them to length for you OR you can use a Dremel with a cut-off wheel and cut them yourself (which is how I've cut things like that in the past).Originally Posted by afrojedi
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
so is 3" lengths long enough to hold pc v3 and a 7.4v 18650 battery pack (that's two right?)You could ask Tim if he would cut them to length for you OR you can use a Dremel with a cut-off wheel and cut them yourself (which is how I've cut things like that in the past).
do you guys give advise on how to make a pcb battery pack? do you sell the PCB? if so is there a wiring guide?
A dual 18650 pack will be a little over 6" long.
Here's the PCB you will need- http://www.thecustomsabershop.com/PC...acks-P482.aspx
Tips and tricks to making your own Li-Ion pack- http://forums.thecustomsabershop.com...-Battery-Packs
Be careful, and good luck.
well I got the pcb right which is great and thanks SOOO much for the li-ion instructions. that's gonna help immensely.
Posting Permissions
Reply With Quote
Bookmarks