MHS Holder, LED Engine and TCSS Chassis system

[GusManB]

I am Still new to Building Sabers as this is my first and i am still overwhelmed mainly because I have seen Many beautiful Sabers out there that are all
custom made in a Mechine shop, and feel very much outclassed as I do not have access to all that machinery. I am pleased that Tim has Services like
Tapping threads and so on witch is what i will use but I am vary limited on tools for Cutting parts, even making A shroud witch is what I want too.

I have An LED Engin RGBA and was wandering If the New style Blade holders, Heat-sink Lenses, Exc.. are compatible with that LED.

Also If I want to use A PCv3 with GREEN for the first blade color and AMBER for the Second and White FOC
How would I wire the Dies up.

and 3rd If I want to have an internal chassis that is joined so the back half screws off like in my Diagram below,
what chassis Part can I use to secure it to the 3" female Extension where the Switches are?
Based on my diagram would it be best to have the PC3, Battery and Speaker behind the Chamber(Window)?

If I am using the Chassis parts in TCSS store how do I Cut the threading rods and Spacers to the correct length
For the PC, Do I need A PEx and CEx if Wanting thos colors and Foc? and is there any Tutorial on how to wire the SB to the LED, Battery/Charge Jack and Switches(What connects to what)?

What extra parts would I need for say A LITHIUM ION Battery, the PC and AV Switches, Charge Port other then wiring?
(PCB? Exc....)

This Is my First Saber and would like to build it on my own or at leat get it startes but want room for A Sabersmith to install A CC later.

Attachment 10104