I found an Anakin LED flashlight with sound (no clash or flash, just hum) for dirt cheap. I'm not an electronics expert by any means, but I'd like to try and adapt the board for use in my next saber build (blue Luxeon Rebel Star).
The flashlight runs on 4.5v (3xAAA) and contains only a speaker and 4 regular blue LEDs.
The red/black go to the battery. Purple goes to what appears to be a momentary lever that's held in the circuit closed position just above the batteries. Green goes to a pushbutton momentary switch to turn on/off the flashlight. White goes to the speaker. Yellow/black goes to the LED module, which just appears to be for blue LEDs and resistors for them.
There are no additional distinctive markings on the other side of the board.
Any help would be appreciated.
Bookmarks