Using this tutorial http://www.thecustomsabershop.com/sa...sp?TOPIC_ID=15
How do i connect 220/470ohm and 1mohm Resistor?
Do I connect w/wire?
Would I need circuit Board?
Using this tutorial http://www.thecustomsabershop.com/sa...sp?TOPIC_ID=15
How do i connect 220/470ohm and 1mohm Resistor?
Do I connect w/wire?
Would I need circuit Board?
Just conect them with a wire. Resistors don't have a negative or positive side, so just stick them in as shown.
So do you have to cut the wires and solder the resistors on?
Yes, you have to splice it in.
<center>Read the FAQ or x-wing won't be happy.
Before posting did you check the Thread Index?.
</center>
<font size="3"><font color="blue">Really? I thought you just taped the resistor to the wire insulation and hoped it made it's own connection by some sort of electrical osmosis.</font id="blue"></font id="size3"> [?] [end sarcasm]
In order to see the Light, you must sometimes risk the Dark.
Play nice JLo.[]
<center>Read the FAQ or x-wing won't be happy.
Before posting did you check the Thread Index?.
</center>
When adding the led and resistors to the EL inverter, does this make the blade any less brighter?
Nope, only if you run them inline before the inverter. Even then powering a little LED wouldn't make it any dimmer to the eye.
<center>Read the FAQ or x-wing won't be happy.
Before posting did you check the Thread Index?.
</center>
Bookmarks