Hello, this is my both my first post, and my first build...
I have 0 experience with wiring and after spending 30+ hours (lurking) on this forum trying to understand wiring... I finally decided, well, what are forums for except for help?
So, I figured that I would ask for either a) someone to help explain how the MWS will end up all hooked up with the Nano Biscotte b) someone to simply draw a diagram or provide a very clear picture of their setup.
I am including:
MWS PARTS:
Nano Biscotte v2 with the wiring harness
Rebel Star LED & MHS Heatsink Module
Li-Ion 18650 3.7V 2600mAh PCB Protected Rechargeable Battery Module
MWS Short Momentary 16mm AV Switch - Nickel
MWS Recharge Port
NON-MWS
Premium 28mm Speaker

Seeing as how I don't have any knowledge of wiring and tend to be very bad at most delicate things, I chose to make this saber using as much of the Modular Wiring System as possible...