Tri-Rebel Rb/Rb/White specs?

[Denz]

Does anyone happen to know what forward voltages are for the Tri-Rebel Royal Blue-Royal Blue-White LEDs dies?

In particular I need to now what size resistor to use for the White die as FoC for the Petite Crouton 2.0.

I checked the LED resistor chart but did not find the Tri-Rebel White LED listed.

Thanks!

[amwolf]

You can use the specs off the single Rebel Star page - for the Royal Blue 910mW @ 700mA 3.4v - Run at 1000mA; for the White 320lm @ 1000mA 3.1v - Run at 1000mA.
The chart is a bit out of date. Go to http://led.linear1.org/1led.wiz, plug in the appropriate numbers, go build!