Ok so if I understand the manual correctly I hook up the recharge port to the neg lead going from the board to the battery pack, and to the positive lead going to the SB correct?
Ok so if I understand the manual correctly I hook up the recharge port to the neg lead going from the board to the battery pack, and to the positive lead going to the SB correct?
"He who sheds his blood with me shall be my brother."
Take a look at this picture.. http://www.thecustomsabershop.com/MW...Port-P877.aspx
Female connector goes to battery pack and male goes to NB battery input.
Tim
The Custom Saber Shop
Ok since I am going to wire the charge port myself it basically is a bridge between the NB and the battery correct?
"He who sheds his blood with me shall be my brother."
Precisely, and you can open/close the bridge by removing/inserting the kill key
that prewired version is a godsend for people with limited soldering experience or for those who work many hours and have little time to do a respectable job when they want (like myself lol).
One last question/conformation. With a LED Switch I hook the resistor to the LED Neg to the Batt Neg, and the Pos to the Main LED Pos. And connect the C1 to the NC1? or am I thinking wrong?
"He who sheds his blood with me shall be my brother."
Bookmarks