-
el sound
i'm sorry to ask this, i know that i saw something about it in these forums but i cannot find it now. is it possible to wire the sound from one of the 8 dollar light and sound sabers to an el saber powered by 9 volts? i can't run two circuits because i only have 6" to work with in my hilt, so i have room for a 9 volt, an inverter and the sound board, but not much else.
i am a nerd, if you don't like it, i will cut you with my lightsaber
-
Still working on that.but there must be a way.
-
Owner of the Custom Saber shop
Somebody has mentioned a voltage reducer from radioshack..takes the input and puts out 4.5v or something like that which would work good for this problem.
Tim
The Custom Saber Shop
-
but wouldn't that put out only 4.5 volts for the inverter as well?
i am a nerd, if you don't like it, i will cut you with my lightsaber
-
Owner of the Custom Saber shop
no..you have the inverter go directly to the 9v and the voltage reducer is also tied into the 9v not 9v--reducer--inverter.
Tim
The Custom Saber Shop
-
so i need to wire the sound parallel to the inverter?
i am a nerd, if you don't like it, i will cut you with my lightsaber
-
Owner of the Custom Saber shop
you need to wire the voltage reducer parallel to the inverter
Tim
The Custom Saber Shop
-
that's what i meant. thanks, i'll try it soon and post on whether it works or not.
i am a nerd, if you don't like it, i will cut you with my lightsaber
-
hey tim, maybe you could post a drawing of what your talking about. its something i was considering but didnt know how to wire it. it might help others who arent real sure what your refering to.
-
yeah, i need a picture because i don't think i quite understand what you mean. also, i looked at radioshack and couldn't find a voltage reducer. are they in the component drawers?
i am a nerd, if you don't like it, i will cut you with my lightsaber
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks