Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: help with fx sb wiring.

  1. #1

    Default help with fx sb wiring.

    help please... im lost. tried so many combo's and dont want to fry anything.
    this is a sb from a fx hasbro 2010 vader.
    if someone could tell me how to wire it on my stunt saber thatd be great.
    also do I need to use a momentary switch? if so can I use a led one and how do I wire it.

  2. #2

  3. #3

    Default

    try this thread
    http://forums.thecustomsabershop.com/-Cheapy-Hasbro-Wiring-Diagrams

    Its hard to tell by your photo but the PCB might have the solder spots labeled. I hope you recorded what wires went where before you cut them.

  4. #4

    Default

    Thanks for the link. I have looked at so many different threads now. Non of them seem to have the same wires as mine. I know what all these went to just need to know how to wire it to my saber now....
    All the diff colored ones went to the LEDs
    the blue says A and purple says B go to the clash.
    Red and black too batteries
    Yellows to switch
    Greens to speaker
    Grey says vss?
    Then of course the pointless on off and try me switch.

  5. #5

    Default

    Still not sure how to wire it up to work best.

  6. #6

    Default

    Quote Originally Posted by e13azar View Post
    Still not sure how to wire it up to work best.
    Is there anyone that has worked with this exact board that can draw out a wireing chart for me? I'm having a real hard time lately trying to figure this out. Don't know why normally I'm real good about this stuff....

  7. #7

    Default

    I wish I could help you, but I've given up trying to figure out all the eleventy million varieties of the FX/Hasbro saber boards. I can tell you that there is *probably* a thread detailing the wiring for your particular board, but it'll take you some time to find the exact one you're using.
    We all have to start somewhere. The journey is all the more impressive by our humble beginnings.

    http://led.linear1.org/1led.wiz for the lazy man's resistor calculator!
    http://forums.thecustomsabershop.com...e-to-Ohm-s-Law for getting resistor values the right way!

  8. #8

    Default Thanks

    Quote Originally Posted by Silver Serpent View Post
    I wish I could help you, but I've given up trying to figure out all the eleventy million varieties of the FX/Hasbro saber boards. I can tell you that there is *probably* a thread detailing the wiring for your particular board, but it'll take you some time to find the exact one you're using.
    I appreciate it. Where do you think I should start looking?

  9. #9

    Default

    In the meantime. If anyone else happens to know how or knows where to find it. That'd be awesome.
    I'm in so much pain anymore I have a hard time thinking straight and figuring things out I used to be able to figure out.

  10. #10

    Default

    http://forums.thecustomsabershop.com...3w-conversions
    http://forums.thecustomsabershop.com...saber-Versions

    Check through those two sections. If the diagram is anywhere, it's likely in there.
    We all have to start somewhere. The journey is all the more impressive by our humble beginnings.

    http://led.linear1.org/1led.wiz for the lazy man's resistor calculator!
    http://forums.thecustomsabershop.com...e-to-Ohm-s-Law for getting resistor values the right way!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •