help with fx sb wiring.

[e13azar]

help please... im lost. tried so many combo's and dont want to fry anything.
this is a sb from a fx hasbro 2010 vader.
if someone could tell me how to wire it on my stunt saber thatd be great.
also do I need to use a momentary switch? if so can I use a led one and how do I wire it.

[e13azar]

here is the pic.
20130829_204934.jpg

[Sevinzol]

try this thread
http://forums.thecustomsabershop.com/-Cheapy-Hasbro-Wiring-Diagrams

Its hard to tell by your photo but the PCB might have the solder spots labeled. I hope you recorded what wires went where before you cut them.

[e13azar]

Thanks for the link. I have looked at so many different threads now. Non of them seem to have the same wires as mine. I know what all these went to just need to know how to wire it to my saber now....
All the diff colored ones went to the LEDs
the blue says A and purple says B go to the clash.
Red and black too batteries
Yellows to switch
Greens to speaker
Grey says vss?
Then of course the pointless on off and try me switch.

[e13azar]

Still not sure how to wire it up to work best.

[e13azar]

Still not sure how to wire it up to work best.

Is there anyone that has worked with this exact board that can draw out a wireing chart for me? I'm having a real hard time lately trying to figure this out. Don't know why normally I'm real good about this stuff....