-
-
Council Member
Jedi Council Member
Yes, recharge ports can be used with battery holders.
-
Force Aware
Ah cool. Am I correct in thinking with only one cell?
-
What type of battery are you trying to recharge in-hilt?
-
Force Aware
-
For Li-Ion, if you are going thru the trouble of installing a recharge port for in-hilt charging, is suggest replacing the battery holder you have now with this...
http://www.thecustomsabershop.com/Pa...tery-P853.aspx
You should have enough space for it to fit if you have a 2xAA holder now, and it will provide roughy 4x the runtime of a single trustfire AA battery. Also make it easy and order an extra JST connectors to wire up the recharge port to make the pack quick disconnect if you ever need to take out the battery. If you have sound on your hilt, don't forget to pick up a killkey for the port to cut power to the soundboard when in storage.
-
Force Aware
Would love to but unfortunately TCSS does not ship these to Canada. Was just thinking of ulternatives until I can find a good source for packs
-
You should email Tim to see if you can purchase one of those packs minus the actual battery cell, and source a quality 18650 locally to build your own protected pack that is still MWS compatible. A couple quick solder joints and some heat shrink. It would be well worth not having to deal with constant recharging or swapping batteries when you are away from home.
-
Force Aware
Not a bad idea. I've been trying to stay away from soldering batteries. I've read it can be dangerous. Is there a thread showing how to solder batteries safely?
-
From what I understand, the internal components of a Li-ion battery cell can handle up to around 200c/400f so with a low melting point solder and a quick steady hand you should be able to tack it together. I'd scuff up the terminals, pre-tin the tabs of the pcb wiring, and pre-flux the battery terminals before soldering the pack together. I know manufacturers don't recommend messing with soldering Li-ion due to their construction, but plenty have done it without incident. Use your best judgement.
An alternate option is to source a protected 18650 battery holder if you have room for it, and just buy a loose unprotected cell. This option does get a bit bulky but much less risky than soldering the battery directly to save space, and you can still get a high capacity battery for long life between charges.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks