ugghhhhhh well fried my first LED last night (by accident.) I wired up one half of the Lancer with no problems. The other half well.... I did my first LED no problem. The second nothing happened no light. I couldnt figure out what I did wrong. I cut off the heat shrink and then I figured it out. I forgot to cut off the extra length of wire off of the resistor so with the way I had them bent the two sides touched Since electricity takes the path of least resistance. It skipped over the resistor and fried my LED.s ARGHHHH So I had to order ANOTHER one LOL. Well I can work on everything else while I wait for it to get here.