OK, I've floated around the threads and read through the PC Manual a few times, and I've put together a not-so-pretty wiring diagram.
Two questions, other then the obvious 'does this look right' question.
1-Can I wire the LED on the illuminated switch the way I did in the diagram (off the switch itself). I only want the LED on the switch on when the saber is powered up.
2- Can the FoC be wired for more then one affect? One for clash and one for blaster blocking?
Basically, I would like to have the Engin LZ4 with 2 Green LEDS on as the main blade, Blue flash for clash, and Red flash for blaster blocking. (< is that even possible?!?)
So, here it be . . .
{It is gone}
I said it was not-so-pretty.
Ok, here is the updated diagram.
That's better.
Comments, concerns?
-The YIn
Bookmarks