-
Jedi Padawan
The illuminated switch has a resistor but the led isn't plugged into the board in those pictures.
The main led doesn't have a resistor because I can get away with it. Take a look at the Nano Biscotte manual, under Drive Adjustments. I didn't fully read it initially and assumed you could get away with not using a resistor on any main led. That is NOT the case. I fried a Lux Rebel Star amber by doing this. Learn from my mistake: read the manual and read it thoroughly before doing anything.
-
Had a feeling it would be something like that. Im using a rebel star and I need the resistor. This is the first time I've come across a set up which doesn't require one. Now to get it in the hilt, get a feeling thats going to be a ball ache. Be good to see you're finished work.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks