Results 1 to 3 of 3

Thread: Resistor values for direct drive..3w, 5w, K2

  1. #1
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,444

    Default Resistor values for direct drive..3w, 5w, K2



    You can also download a PDF version here

    The listed Wattage is a minimum figure, you can use a higher rated resistor.

    Led's not worth using where omitted. The K2's listed are the high current ones. The reason some K2's have a lumens range is that they come in different versions.

    I used recommended average parameters. Most of the led's could be driven past these settings.
    Tim
    The Custom Saber Shop

  2. #2
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,444

    Default

    There is a new updated chart here

    http://www.thecustomsabershop.com/t-resistors.aspx
    Tim
    The Custom Saber Shop

  3. #3
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,444

    Default

    P4 info...

    Use this info to calculate correct resistor or just use a buckpuck.

    Red
    mA max 800

    Green
    mA max 1000

    Blue
    mA max 1000

    For Forward Voltage look at the very last digit on the back of the star and compare it to this chart.

    Tim
    The Custom Saber Shop

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •