First PVC chassis in a G2.0

[LyleStyle]

I've been using a Graflex 2.0 as a learning saber. Did 3 builds in it so far. This is a PVC chassis cut from a trashed soccer goal and a seltzer bottle, with testers paint, and supahglew. It's my first internal set up with no wire mess or semi-floating board.

Roughly moded TCSS speaker holder, NB V3, 18500 battery, 7/8" B/B/W LED for FoC, fonts from saberfont.com and Shameem. Internal recharge port under clamp.

Rey config.

EDIT: The blue led hanging off of the bottom lights the speaker vent. It's hooked into the main LED pickups to mirror blade flicker and ignition. It ain't exactly cannon but it was something new to try.

All ideas stolen.

GraflexSaberChassis1.jpg