Anakin MR conversion

**UltraSWG** · 12-17-2005, 11:47 AM

Yeah, what Strydur said. Not even a 1 watt would look like that. Post a pic of the LED with the wires soldered on, I suspect you have something criss crossed.

FYI, the clash sensor wire and purple wire should be soldered to the positive post and all the other wires should be soldered to the negative post.

**Usernames suck** · 12-17-2005, 06:54 PM

I accidently ripped the blue wire that comes out of the clash sensor out.

The left side is the purple and grey to positive and the other side is the brown wire is on the right and goes to the negative side.

The impression of the Sith will never return, you have lost - mace windu

**Usernames suck** · 12-18-2005, 08:27 PM

Do i need the shock sensor to make it brighter because when i wired it up like you said it was the same but i didnt have the clash sensor hooked up.

The impression of the Sith will never return, you have lost - mace windu

**Strydur** · 12-18-2005, 10:35 PM

This is how we currently wire them.

Tim
The Custom Saber Shop

**Usernames suck** · 12-19-2005, 12:42 PM

But is the clash sensor neccesary?

The impression of the Sith will never return, you have lost - mace windu

**Strydur** · 12-19-2005, 12:57 PM

nope

Tim
The Custom Saber Shop

**Usernames suck** · 12-19-2005, 01:47 PM

So how come mine isnt as bright then? I have it wired like in the pic you posted Tim. Do I need a collimator lens? Is everyone aware that I am using a white led with the color discs and if this is how it is supposed to look can i just exchange the white led for a green led?

The impression of the Sith will never return, you have lost - mace windu

**Strydur** · 12-19-2005, 02:28 PM

You dont have any lens on it? that could do it also

Are you sure you have it wired like the pic? It looks like in the pic you posted that you only have 1 negative wire coming out of the sound module.

Tim
The Custom Saber Shop