Quote Originally Posted by Paedryn View Post
I was thinking that a blade holder/emitter based off of style 24 without the multiple levels of rings to attach to the main body. Maybe just a straight 0.5 inch or so section before the threading starts. It would create a more solid look and possibly make it easier to install the blade retention screw. Or you could use the look of the Short Choke Style 1 and have a single "grip" area closer to the main body. I plan to use the BH24 in my current build and have been looking at it closely. Just a thought!
I’m not questioning your request, but you said you were looking at BH 24.
The shop pictures don’t show the BH 24 too well. The MHS builder does.
I’ve used BH 24 on my son’s saber, and I had the retention screw (8-23) place in the lower ring (closer to the hilt).
I’ve used this saber to perform the “tree trunk test” (full on whopping a tree, with a 1/8” walled 1” blade in my case) without any issues from the screw placement.

Here are some pics in case you wanted to see where I placed the screw.
2B01A615-B314-4C38-A952-6F42444F1172.jpgE85993F2-72EB-4CF4-8005-993B7ECAAC0E.jpg

I hope this helps!