1.5'' X 24'' sink tube?

[rotccole]

Anyone have a source for longer than 1' sink tubes?

[Silver Serpent]

You'd need to check a plumbing supply store. But I've never seen them come in 2 foot lengths. Most sinks don't need that long of a connecting tube.

[The Yin]

What are your plans for it?
You may be able to connect two 1' tubes together.
With 2 of these: http://www.thecustomsabershop.com/MH...pter-P162.aspx
And one of these: http://www.thecustomsabershop.com/Do...le-1-P127.aspx

just a thought.

[MrCafe]

When I was looking I couldn't find anything longer then a foot. I connected tubing together to get a longer piece. You could just look for chrome piping in auto body shops, but it gets more pricey then plumbing parts. I think Yin's option would be cheeper if you are going with cost effective.

[rotccole]

It was going to be part of a new design I haven't seen before, but...I'm not trying to break the bank, so it might have to wait.
I couldn't connect two, because this was going to be the middle part of a saber and supposed to be the support for the entire thing. It was basically a very, very large crystal chamber (sorta don't wanna give too much away) in the middle of a saber staff. Oh well. Back to the drawing board!!!

[Crystal Chambers]

You could always look for aluminum tubing which iMO is the better route to go anyways. The only downside is the required walll thickness will reduce your inner diameter.

[Darth Obi Don]

Try www.metalsdepot.com
They have tubing and pipe in multiple sizes and metals,and they're not too expensive.
I like their 1 inch I.D 1.25 inch O.D aluminum tubing for blade holders.
Don M.