-
A very cool project all around! Very nice work so far!
-
Life has really gotten in the way of saber building but here is an update to my twilek build. What you see here is the epoxy Clay added for color depth. It was supposed to be translucent Blue but i like the way it turned out. A fine grain sanding to come and some gloss will make them pop. i still need to build the internals ans the swith will mount to the sled. I am also work on the emitter, a brass lotus blossum should look schweet.
Clay before baking
Clay after baking with set screw marks
-
-
Hey question i was thinking about putting one of the Cree X-2 in there Blue Green blue white and run them all at once. Can i run this directly off one 18650 3400mah and still have decent run time?
-
number 2 baked
-
Blade Holder/ Adornment: I have it sized to a 3/4" trans white blade and will do some etching work on the adapter so it matches the sabers lines. I think i going to wire and X-2 Cree BBGG for teal and run all four for max brightness. I maybe able to squeeze in 2 18650 4000mah lions for a greather run time.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks