Hey folks!

Sorry to post this, but I'm hoping I can get a few short answers and then be on my way to finishing a few things...

1) I'm using an econo board for my son's saber pike and I pulled the LEDs out of the LED pad. He wants an amber blade. Can I pick up red LEDs and use a yellow filter? Should I find two yellows and a red?

2) Also, can anyone tell me, is it the higher the wattage the brighter the bulb or the other way around?

3a) I would like to use an AV Switch and the bezel but was hoping for a switch that is not illuminated. Can I wire the illum switches and not use the illumination, or is that a necessary?

3b) what size of hole needs to be drilled in for the illuminated AV Switches?

4) I have a guarded momentary switch from the shop here and might not have to buy another switch (see Q#3) if the guarded switch will fit snugly into the bezel for the av switches... Anyone have any info on this?

5) Can someone order for me the green LEDs that Tim sells here in the shop as to their brightness? Starting with brightest to not-the-brightest?

Thanks in advance for all the help amigos!
CMills