Hi all.
I'm preparing my first lightsaber, for the moment I will not install any soundboards but I would put a AV LED switch and the kill key.
I chose these components:
- 16mm Anti Vandal Latching Blue Ring Switch ( http://www.thecustomsabershop.com/16...itch-P705.aspx )
- 2.1mm Power Jack ( http://www.thecustomsabershop.com/21...-Jack-P37.aspx )
- Kill plug style 4 ( http://www.thecustomsabershop.com/Ki...le-4-P783.aspx )
The problem is to connect the AV switch with the recharge port, so when the kill key is in the switch's LED is off.....and when I remove the kill key the LED turns on; once LED is on, I can turn on/off the blade.
In this forum I found some wirings but I'm not sure it will work.
Thanks in advance
Bookmarks