Hope I forgot nothing

[JeromeV]

Here's my part list, based on this thread :

1 Screw on LED blade holder style 4
1 MHS "new style" Heat Sink
1 MPS Pommel style 6
1 MPS Clip1 MPS insert style 13
1 7" Fluted with standard style switch hole
1 Double ended male threaded connector style 2
1 1.2" Double Female

1 8-32 x 1/8" Set screw
1 4AA Battery holder
1 Seoul P4 (Blue)
1 Collimator Lens 5° viewing angle
1 3.3ohm 5w resistor
1 Push on/push off switch with black button
1 Seoul P4 Lens Holder
1 LED "TCSS style" Battle blade 1" OD (40 inches)
1 MHS choke style 3

Please tell me if I'm missing somthing.
Thanks in advance.

[Boj-Vaati Mau]

Are you planning on drilling and tapping your own holes? If not you'll need add drill & tap hole (I'm assuming for your blade retention screw).
You might want to add a Star Thermal Tape to hold the LED and Collimator assembly while you're putting the Heat Sink/LED assembly in the Blade Holder.
For the sake of it you might want to get the 8.7 degree Collimator to decide which you like better and to save on shipping cost.
Do you have an Allen Wrench for the Set Screw?
Did you want any Powder Coating? If so that can be added in on the MHS Builder wich will add it to your order.
Other than that, it looks like you're good to go.
Bon Voyage, mon ami!

[JeromeV]

Hi Boj-Vaati Mau

Thanks for your fast response.

Concerning screws, holes and allen wrench, I have not yet decided wether to use french ou US measures.
If I stick with US, I'll pay for the drill & tape service, otherwise I'll buy french tools is France. Anyway I own a Hoyt (US archery brand) compound bow so I already have many allen wrench sets.

I didn't see the 8.7 degree Collimator, I'll give it a try.
Ok for the thermal tape.

About powder coating, everytime I tried with colors I like, the product in this color is marked as no longer available. I'll try again later.

Thanks again.

[MandoJoe]

If I'm not mistaken, I believe the powder coating service is still "out of stock". Tim had to take it down for a bit to catch up on back orders. It should be back soon.

[JeromeV]

Not really a problem.

I think I will try olive oil weathering method